Optocoupler Semiconductor Device LCR-0202 Series for Electric Circuit

Overview

Phototransistor optocoupler devices use the current changes to control the resistance change. It is a Linear optocoupler which through the strictly selected, aging, testing. Optocoupler isolation made up of CDS and LED. Package tyoe for LCR-0202 is DIP-4(cuboid small package). It is widely used in audio power amplifier protection and control.


It is recommend that the welding should be made at 4mm of lead wire far away from optoisolator’s seat, and the welding be completed in the shortest possible time.

Feature

Pure resistor and non-polarity output

Wide range of analog liner resistance, "on" at the low resistance. "off" at high resistance

Simple circuit configuration suitable for DC and AC use

Input to output isolation, and low distortion coupling

Datasheet

Type
LCR- 0202 Series
Package
DIP-4
Input current
0- 20mA
Input Voltage
1.6- 2.5Vdc
Output Light Resistance
50Ω - 1KΩ @ 20mA- 0.01mA
Output Dark Resistance
1Ω - 10MΩ @10 seconds off later
Response Period
<2.5mS
Insulating Voltage
>2500VRMS
Working Frequency
<300KHz
Max Power
100mW
Dimension(mm)
12.5*7.5*8.0

Senba is one of the most professional PIR sensor manufacturers for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文