PIR Sensors Used in Security Alarms and Automatic Lighting Applications D205B

Overview

D205B is widely used for ceiling lamps and has a large detection angle.The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, America, Turkey and Europe.

Features

Low power consumption


Wide angle


Slight movement can be detectable


Recommended Model
D205B
Encapsulation Type
TO-5
IR Receiving Electrode
0.7×2.4mm, 4 elements
Window Size
4.9 × 4.9mm
Spectral Response
5–14µm
Transmittance
≥75%
Output Signal[Vp-p]
≥5000mV
Sensitivity
≥4300V / W
Detectivity (D*)
1.6 × 108 cmHz 1/2 / W
Noise[Vp-p]
<70mV
Output Balance
<10%
Offset Voltage
0.3 ～ 1.2V
Supply Voltage
3—15V
Operating Temp
-30—70ºC
Storage Temp
-40—80ºC
Field of View


Applications 

Ceiling Lamps


Home security systems


Home Alarm System. As its ability to sense warm, moving objects such as people walking into a room is coupled with simplicity and cost effectiveness.


FAQ
1. Can PIR Sensor for LED light detect animals?
PIR sensors are excellent in human and animal detection. They are mostly used in triggering an intruder alarm and activate household appliances upon the presence of a human.

2. Do PIR motion sensor for lights work through glass?
No, alarm motion sensors do not work through glass. Most motion sensors use passive infrared (PIR) technology to detect motion. Changes in IR energy are not easily detected through glass. This is why motion sensors will generally not work through windows, which are usually insulated.

评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文