Knowledge Introduction of the Idr Sensors

Idr sensor has no polarity. It is purely a resistor device. It can be used with either DC voltage or AC voltage. Idr sensor is a photoelectric element made of semiconductor material and operated by internal photoelectric effect. Under the action of light, its resistance often decreases. This phenomenon is called photoconductive effect. Therefore, idr sensor is also called photoconductor. When a voltage is applied between the metal electrodes at both ends of the idr sensors, a current passes through it. When illuminated by light of appropriate wavelength, the current increases with the increase of light intensity, thus realizing photoelectric conversion.

Semiconductors such as metal sulfides, selenides and tellurides are the main materials used to manufacture idr sensors. Usually, thin idr sensors and comb-shaped ohmic electrodes are fabricated on insulating substrates by coating, spraying and sintering methods, and then lead wires are connected and packaged in sealed shells with transparent mirrors to avoid dampness affecting their sensitivity.

In dark environment, its resistance value is very high. When illuminated, as long as the photon energy is larger than the forbidden band width of semiconductor material, the electron in valence band can absorb the energy of a photon and then transit to conduction band, and produce a positive charge hole in valence band. This pair of electrons and holes produced by illumination increases. The number of carriers in semiconductor materials decreases the resistivity, resulting in a decrease in the resistance value of idr sensors. The stronger the illumination, the lower the resistance. When the incident light disappears, the electron-hole pairs generated by photon excitation will gradually recombine, and the resistance of the idr sensors will gradually restore to its original value.

The main parameters of idr sensors are bright resistance (RL), dark resistance (RD), maximum operating voltage (VM), bright current (IL), dark current (ID), time constant, temperature coefficient sensitivity, etc.

Senba Sensing Technology Co.,Ltd., was founded in 2005, with the focus on producing the top quality pir sensor d204b. If you want to know more details, just feel free to contact us!


评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

How to Use Ldr Sensors to Realize the Circuit Control of Photoswitch?

图片
       The company head quarter and the manufacturer facility are located in a beautifully landscaped industrial park, named after Senba, in Nanyang, Henan. In order to provide better customer services, we also have set up branches in Shenzhen, Ningbo, Wenzhou. Until now, Senba   has become the most advanced manufacturer specialized in PIR sensor technology   in China.   How to Use Ldr  Sensors to Realize the Circuit Control of Photoswitch? Ldr sensors are sensitive to light sticking. The stronger the light, the smaller the resistance value; the darker the light, the greater the resistance value. So we can use this characteristic to construct the ldr sensor circuit , and cooperate with relay/triode/MOS transistor to realize the photoswitch. Next, the ldr switch circuit   of realizing photoelectric switch by using ldr sensor, ldr transistor  and relay is introduced.   1. What is Ldr Sensor The working principle of ldr sensor is based...
阅读全文

Optocoupler Semiconductor Device LCR-0202 Series for Electric Circuit

图片
Overview P hototransistor optocoupler  devices use the current changes to control the resistance change. It is a Linear optocoupler which through the strictly selected, aging, testing. O ptocoupler isolation   made up of CDS and LED. Package tyoe for LCR-0202 is DIP-4(cuboid small package). It is widely used in audio power amplifier protection and control. It is recommend that the welding should be made at 4mm of lead wire far away from optoisolator’s seat, and the welding be completed in the shortest possible time. Feature Pure resistor and non-polarity output Wide range of analog liner resistance, "on" at the low resistance. "off" at high resistance Simple circuit configuration suitable for DC and AC use Input to output isolation, and low distortion coupling Datasheet Type LCR- 0202 Series Package DIP-4 Input current 0- 20mA Input Voltage 1.6- 2.5Vdc Output Light Resistance 50Ω - 1KΩ @ 20mA- 0.01mA O...
阅读全文