Related Knowledge of the Optocoupler




The Brief Introduction of the sensor optocoupler
The optocoupler (optical coupler, and the english abbreviation is OC) is also called photoelectric isolator, which referred to the optical coupler. The optocoupler transmits electrical signals through optical media. It has a good isolation effect on the input and output electrical signals, so it is widely used in various circuits. At present, it has become one of the most diverse and widely used optoelectronic devices. The optocoupler are generally composed of three parts: light emission, light reception and signal amplification. The input electric signal drives the light-emitting diode (LED) to emit a certain wavelength of light, which is received by the photodetector and generates photocurrent, and then amplified and output.

The Classification of the optocoupler sensor 
There are dozens of types of optocoupler, including general type (it is also divided into the nonbase lead and base lead), Darlington type, Schmidt type, high-speed type, optical integrated circuit, optical fiber dimension, photosensitive thyristor type (with one-way thyristor, two-way thyristor) and photosensitive field-effect tube type.

The Advantages of the Optocoupler
It has the one-way signal transmission, and the input and output terminals completely achieve electrical isolation, and the output signal has no impact on the input. It has strong anti-interference ability, stable operation, no contact point, long service life, high transmission efficiency. Optocoupler is a new device developed in the 1970s. It has been widely used in electrical insulation, level conversion, stage coupling, driving circuit, switch circuit, chopper, multi-resonator, signal isolation, stage separation, pulse amplification circuit, digital instrument, long-distance signal transmission, pulse amplification, solid-state relay (SSR), instrumentation, communication equipment and computer interface. In the single-chip switching power supply, the linear optocoupler can be used to form the optocoupler feedback circuit, and the duty cycle can be changed by adjusting the current of the control terminal to achieve the purpose of precise voltage stabilization.

Senba passive ir motion sensor manufacturers, was founded in 2005, with the focus on producing the top quality photoelectric components, such as digital PIR sensor, Photoresistor and Light Sensor, etc.

评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文