Troubleshooting of Digital Pir Obstacle Avoidance Sensor Group

 Digital pir obstacle avoidance sensor is a digital input module, which is also called proximity switch, infrared switch and photoelectric switch.

 

Question: Is the digital pir obstacle avoidance sensor a digital pir sensor chip or an analog pir sensor?

 

Answer: This is a digital pir group, and the switch is the NPN photoelectric switch which is  normally open; the output state is 0,1, that is, the low level and high level in the digital circuit, and output is in the high level at the normal state, detecting the low level of the target output.

 

Question: Can you connect it to the IO port of the single pir sensor chip computer?

Answer: It can be directly connected to the IO port of MCU.

 

Question: What is the value of the pull resistance added?

Answer: Plus the resistance value of the pull resistance, the resitstance value is generally about 10K.

 

Question: Why is the light always on when the power is connected?

 

Answer: Firstly, the power supply should be stable at 5V plus 2 percent. Secondly, the output terminal of the probe can not be connected to the output port of the single chip computer.

 

Question: Why is the indicator always on when connected to the infrared switching power supply?

 

Answer: 1. Please check whether the power supply is connected wrongly, that is, the infrared output is connected to the positive pole of the power supply; 2. Please check if there are obstacles in the direction of the probe, preferably in the open direction.

 

Senba, has been committed to developing and manufacturing high-quality and high-performance digital pir obstacle avoidance sensor to provide customers with the best quality service.

 


评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文