Parameters and Characteristics of Photosensitive Resistance

 The main parameters and characteristics of  photosensitive resistance are as follows:

 

1. Bright resistance in the photocurrent state

 

Under a certain applied voltage, the current flowing through the photoresistor when light is irradiated is called the photocurrent, and the ratio of the applied voltage to the photocurrent is called the light sensor resistor, which is usually expressed as "100LX".

 

2. Dark resistance under dark current state

 

Under a certain applied voltage, the current flowing through the photoresistor when there is no light is called dark current. The ratio of the applied voltage to the dark current is called the dark resistance, which is usually expressed as "0LX".

 

3. Sensitivity

 

Sensitivity refers to the relative change value of the dark resistance when the photoresistor is not irradiated by light and the light resistance when irradiated by light.

 

4. Illumination characteristics of photoresistor

 

The relationship between the photocurrent and luminous flux of the photoresistor under a certain applied voltage. Different types of photoresistors have different illumination characteristics, but the illumination characteristic curves are all nonlinear. Therefore, it is not suitable for quantitative detection, which is the shortcoming of photoresistor. Generally, it is used as a photoelectric switch in automatic control systems.

 

5. The spectral characteristics of the photoresistor are related to its material.

 

The vulcanized photosensitive resistance has high sensitivity in a wide spectrum range, with the peak value in the infrared region; the peak value of cadmium sulfide and cadmium selenide is in the visible light region. Therefore, when choosing a photoresistor, the material of the photoresistor and the type of light source should be considered together in order to obtain satisfactory results.

 

Senba Sensing Technology Co.,Ltd., a manufacturer of passive infrared sensor, was founded in 2005, with the focus on producing the top quality photoelectric components, such as digital PIR sensor, Photoresistor and Light Sensor, etc. If you want more information about  pir sensor chip, please feel free and contact us.

 


 

评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文