The Advantages of Digital PIR Sensor

 Digital PIR sensor is a new type of electronic weighing sensor developed on the basis of traditional resistance strain sensor, combined with modern microelectronics technology and microcomputer technology integration. Its advantages are as follows:

 

1. Solve the problem of poor signal of analog sensor:

 

The output signal of digital PIR sensor is about 3～4 V, and its anti-interference ability is much more than millions of analog signal.

 

2. Solve the problem of radio frequency interference:

 

In the design of digital infrared sensors, the anti-interference ability has been considered. They can be in the high interference area and ensure the measurement performance.

 

3. Solve the problem of moisture-proof and anti-corrosion:

 

The digital infrared sensor adopts 100% stainless steel welding shell.

 

4. Solve the problem of lightning protection, off-load and temperature influence:

 

The digital infrared sensor has the ability of lightning protection and high current discharge, which is particularly important in outdoor installations. In addition, the digital weighing sensor can automatically compensate and adjust the impact caused by unbalanced load and temperature change.

 

5. Solve time effect

 

When the load time is added to the sensor, its output often changes greatly. The digital PIR sensor automatically compensates for creep using software in the internal microprocessor.

 

6. The digital PIR sensor has higher precision, reliability and stability, which can reduce the error often caused by analog sensor:

 

The corrected data is stored in each sensor in digital form, which can reduce the accumulated error caused by analog signal.

 

7. Self-diagnosis function

 

The digital PIR sensor has the function of self-diagnosis, which could continuously detect  the internal working condition. When the fault is detected, it will send out the error code, which greatly reduces the possibility of missing the detection fault.

 

We are a pir sensor manufacturers, if you want more information about pir am312 datasheet, please feel free and contact us.

 


评论

发表评论

此博客中的热门博文

The Application of the Idr Sensor

图片
1. Electronic photometry The photometer can be used to measure the brightness of people and objects, so as to help the photographer choose the appropriate exposure speed. The following is the schematic diagram of the electronic photometer. The ldr sensor  changes the intensity of light into the difference of resistance value, so that the brightness can be displayed directly by different currents flowing through the meter. Among them, R1 and R2 are used to adjust the surface calibration and W is used to control the sensitivity of the meter head. 2. Infrared thermometry The infrared light radiated by the measured object is modulated into 800Hz optical signal by a modulation disc with a filter, which is approximately sinusoidal wave. The modulated light entering into the idr sensor is converted into electrical signals and then sent to the FET amplifier for amplification. The output U0 can reflect the temperature. In order to reduce the influence of noise and temperature c...
阅读全文

Non Contact Thermometer

图片
Non-contact temperature measurement solution The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage. Infrared ear thermometer is the most commonly used thermometer. N on contact temperature measurement sensors   can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy op...
阅读全文

SMD Passive Infrared Sensor S18-L262B-2

图片
Overview All of Senba products in this Catalog reach ROHS standard. The EU ROHS Directive refers to the European Union's directive 2011/65/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. We are the specialist PIR sensor manufacturer for more than 15 years  and we have advanced passive infrared technology . Feature Custom design is available. Higher in cost-performance Long range Wide angle Technical Data 1.Maximum Ratings Characteristics Symbol My. Value Max. Value Unit Remarks Working Temperature UNTIL -30 70 °C Storage Temperature TST -40 80 °C Max.current for pin Into -100 100 mA Viewing angle X=110° Y = 90 ° Detection spectral response L 5 14 μm 2.Working Conditions (T=25℃， Vdd=3V，Except other requirement) Characteristics Symbol Min. Type Max. Unit Remarks Supply Voltage V DD 2.2 ...
阅读全文